Surfboard Roof Rack Review: What to Buy Now

Surfboard Roof Rack Review: What to Buy Now

A surfboard roof rack should make the trip to the beach easier, not turn every motorway mile into a nervous mirror check. This surfboard roof rack review looks at the main options for UK surfers: soft racks, fixed crossbars and locking systems. The right choice comes down to your car, the boards you carry and whether you need a quick summer setup or dependable transport through wet, windy sessions.

What matters in a surfboard roof rack review

A rack is only as good as its fit. Before comparing price tags or extra features, check your vehicle roof type. Bare roofs, factory roof rails, flush rails and fixed mounting points all need different fitting methods. Never try to make a rack fit by overtightening straps or improvising attachment points. A board coming loose at speed is dangerous for you, other road users and your kit.

Board size matters too. A shortboard creates less wind resistance than a longboard, but either can become unstable if it is not supported properly. If you regularly carry a 9ft longboard, a wide foamie or two boards in one stack, look for longer pads, strong straps and a setup designed for the load. Check both the rack and vehicle roof load limits before setting off.

The best setup is not always the most expensive one. A simple soft rack can be ideal for a weekend away, while a surfer driving to the Gower several times a week may get far more value from fixed bars and locking straps.

Soft surfboard roof racks: the flexible choice

Soft racks are padded straps that run through the car, usually through the front and rear doors. The pads sit across the roof, creating a cushioned base for the board, while separate straps secure it in place. They are a popular choice for cars without roof rails and for surfers who do not want permanent bars on their vehicle.

Their biggest advantage is convenience. A decent set packs down easily, can move from one suitable car to another and costs less than a full roof bar system. For occasional use, travelling or carrying one or two boards to the coast, they offer a straightforward answer.

There are trade-offs. Because the straps run through the cabin, they can create wind noise and may let in a little water during heavy rain. They also take longer to fit than a permanent setup. The pressure should be firm enough to stop movement, but not so hard that you distort door seals or put unnecessary strain on the board.

Soft racks work best on vehicles with four doors and a clean, smooth roofline. They are less suitable for cars with panoramic roofs, unusual door frames or doors that cannot close securely over the straps. Read the vehicle guidance first, rather than assuming every soft rack works with every car.

For a single shortboard or mid-length, soft racks can be brilliant. For repeated long-distance journeys with several larger boards, they are usually a compromise rather than the long-term answer.

What to look for in a soft rack

Choose thick, grippy pads that spread the load across the roof rather than narrow straps that can dig in. Cam buckles should feel solid and should be covered or positioned so metal does not touch your board or paintwork. Good strap tails are long enough for larger boards but easy to tie off neatly.

A quality set will also include clear load guidance. Avoid no-name straps with vague claims and light buckles. Saving a few pounds is not worth it when your board is travelling above the windscreen at 60mph.

Fixed roof bars: better for regular surf trips

Fixed roof bars use your vehicle's existing rails or dedicated mounting points. Once fitted, they provide a solid platform for padded surfboard carriers, straps and other kit such as a roof box. They cost more at the outset, but regular surfers often find them quieter, quicker and more reassuring than soft racks.

For a car that is used for beach days, family holidays and weekly dawn patrols, fixed bars are the more practical investment. You can leave the bars on through the season and load boards in minutes. They also keep the cabin clear and avoid straps rubbing against door seals.

The downside is vehicle-specific fitting. Bars that suit one make and model may not fit another, so check the exact year and roof style. They can also add noticeable wind noise and slightly affect fuel economy when left on permanently. If you only carry a board a few times each summer, that extra cost and drag may not make sense.

Add proper rack pads before putting a surfboard directly on bars. Wide, well-padded covers protect the rails of your board, reduce vibration and help the board sit securely. They are not a substitute for straps, but they make a big difference to the condition of your equipment.

Are locking racks worth it?

Locking board carriers are worth considering if you leave boards on the car while grabbing food after a surf, stopping at the shops or parking near a busy beach. They can make loading fast and add a useful deterrent, especially with premium boards. Most use a clamping arm around the board, often with padding to protect the deck and rails.

They are not a licence to leave a board unattended for hours. Any rack can be targeted, and salt, sand and regular use can affect moving parts over time. A locking system adds convenience and peace of mind, but it should still be checked before every journey.

For surfers carrying several boards, traditional straps over padded bars can be more versatile. Locking carriers tend to suit one or two boards neatly, while a stack of mixed shapes needs more room and careful strapping.

How to secure a surfboard properly

Put the board deck-down, with the nose facing forward. This is the standard setup because the deck is generally better shaped to sit against rack pads, and the fins remain clear of the roof. Some surfers prefer nose-back loading in particular conditions or with particular board shapes, but the key point is consistency: use the orientation recommended by your rack manufacturer and make sure the board cannot shift.

Run straps around the bars, not simply around the board and roof. The buckle should sit above the rack pad or on the side of the board, never directly against the rail. Twist the strap once before tightening if it is likely to flap in the wind. That small twist can cut down on the loud humming that starts at speed.

Tighten firmly, then test it. Push the nose, tail and centre of the board from each side. The car should move slightly before the board does. Tie off loose strap ends securely. A flapping tail can damage paintwork, distract other drivers and eventually work itself loose.

Longboards need extra attention. Their length catches more wind, and overhang can affect visibility or create a hazard in car parks. If the board extends significantly beyond the front or rear of the vehicle, follow UK requirements for projecting loads and use a clearly visible marker where needed. For longer journeys, a nose tie-down can provide extra stability, but only attach it to a proper rated point, never a random piece of trim.

Small checks that protect your board

Salt and sand are hard on rack hardware. Rinse straps, buckles and locking mechanisms with fresh water after coastal use, then let them dry before packing them away. Check for fraying, cracked plastic, corroded metal and compressed rack pads. Replace worn straps before they fail, not after.

It is also worth using a board bag for longer motorway journeys. A bag will not make a poorly secured board safe, but it does protect against road grit, UV exposure and minor knocks while loading. Be aware that a bulky bag creates more wind resistance, so recheck strap tension after the first few miles.

When choosing between soft racks, fixed bars and locking carriers, buy for the trips you actually make. A reliable, correctly fitted setup suited to your car will always beat an overcomplicated rack that stays in the garage. Get it fitted, load the board with care, and the only thing left to worry about is whether the tide is doing what the forecast promised.

Back to blog